Everbuild Pinkgrip 350ml
Everbuild Pinkgrip 350ml is a high-strength, solvent-based construction adhesive developed for demanding fixing and bonding work. Recognised by its distinctive pink colour, this popular direct-bond adhesive combines powerful initial grab with a no-slump consistency, helping installers secure a wide range of building materials quickly and efficiently. It is a practical choice for builders, carpenters, shopfitters, maintenance professionals and DIY users who require a dependable alternative to mechanical fixings for suitable applications.
The adhesive is formulated to grip materials as soon as they are brought together. This powerful initial hold can reduce or eliminate the need for temporary supports, pins or battens in many situations. Its thick consistency also allows it to fill minor gaps between uneven surfaces, making it particularly useful when working with common construction materials that may not be completely flat.
High-grab direct bonding
Pinkgrip is designed to provide a strong direct bond without requiring a lengthy waiting period before the two surfaces are joined. Once the adhesive has been applied, the components can normally be pressed firmly into their final position. The instant grab helps prevent lightweight materials from sliding or moving while the bond develops, allowing work to progress more efficiently.
The no-slump formulation is especially helpful on vertical surfaces. Unlike thinner adhesives that may run down the substrate, Pinkgrip remains where it is applied. This makes it easier to control the amount of adhesive used and helps provide consistent contact between the materials being bonded.
Suitable applications
Everbuild Pinkgrip 350ml can be used for many general building, refurbishment and joinery tasks. Typical applications include fixing skirting boards, dado rails, architraves, timber battens, wall panels, carpet grippers and certain types of cladding. It can also be used to bond suitable plasterboard, plywood and other sheet materials to compatible backgrounds.
The adhesive provides good adhesion to many common building surfaces, including timber, brick, plaster, plasterboard, concrete and masonry. It can also bond selected metals and rigid materials where at least one surface is porous. Because construction materials and surface finishes vary considerably, users should always carry out a small compatibility and adhesion test before beginning a large or important installation.
Interior and exterior projects
Pinkgrip is suitable for many internal and external applications when it is used in accordance with the manufacturer’s instructions. For outdoor work, the completed bond should be protected from prolonged or excessive water exposure, and the materials being joined must be suitable for exterior conditions. The adhesive is not intended to replace structural mechanical fixings where these are required by the design of the installation.
Its broad range of applications makes Pinkgrip a valuable product for general repairs and finishing work. One cartridge can be used across multiple jobs, from attaching interior mouldings to securing suitable decorative or building panels. The 350ml cartridge fits a compatible heavy-duty sealant or cartridge gun, allowing the adhesive to be applied in controlled beads.
Surface preparation
Correct preparation is essential for a strong and durable bond. Surfaces should be sound, clean and free from dust, grease, oil, loose paint or other contamination that could prevent proper adhesion. Flaking coatings and weak material should be removed before application. Although Pinkgrip can accommodate small surface irregularities, it should not be used to bridge large gaps or compensate for unstable backgrounds.
Cut the cartridge nozzle to create an opening appropriate for the job, then fit the cartridge into a suitable applicator gun. Apply the adhesive in beads or spots according to the size, weight and shape of the material being fixed. On larger panels, use evenly spaced beads that allow air movement and solvent release rather than covering the entire surface with a solid layer.
Applying Everbuild Pinkgrip
Position the material while the adhesive remains workable and press it firmly against the receiving surface. A slight twisting action can help spread the adhesive and improve contact. Check the alignment immediately, as the product’s high initial grab may make later adjustment more difficult. Heavy, overhead or safety-critical components must still be mechanically supported or fixed as appropriate.
The rate at which the adhesive develops strength will depend on temperature, ventilation, the porosity of the surfaces and the quantity applied. Cooler conditions, thick beads and non-porous materials may increase curing time. Avoid loading or disturbing the completed bond until the adhesive has developed sufficient strength.
Important compatibility information
Because Pinkgrip contains solvents, it should not be used with expanded polystyrene or other materials that may be damaged by solvent-based products. It may also be unsuitable for some plastics, flexible vinyl, bituminous surfaces, mirrors, permanently wet locations or materials that could suffer staining. For these applications, select a specifically compatible solvent-free or specialist adhesive.
At least one of the surfaces should normally be porous so the solvent can escape effectively. Bonding two large, non-porous materials together may delay drying or prevent the adhesive from curing correctly. Users should consult the latest manufacturer instructions when working with unusual substrates or in demanding service conditions.
Safe use and storage
Apply Everbuild Pinkgrip in a well-ventilated area and keep it away from flames, sparks and other ignition sources. Avoid breathing vapours and prevent contact with the skin and eyes. Appropriate protective gloves should be worn, and the cartridge must be stored securely away from children. Any uncured adhesive should be cleaned using a suitable cleaner recommended for the surrounding surface; cured material will generally require mechanical removal.
Why choose Everbuild Pinkgrip 350ml?
Everbuild Pinkgrip 350ml provides the strong initial grab, gap-filling properties and easy application required for everyday construction work. Its thick, no-slump formula stays in place on vertical surfaces, while the visible pink colour helps users monitor application and coverage. For fixing timber trims, boards, panels and other compatible building materials, it offers a fast and convenient way to produce a secure, professional bond.
- High-strength, solvent-based construction adhesive
- Powerful initial grab helps hold materials immediately
- No-slump consistency for vertical applications
- Fills minor gaps between uneven surfaces
- Bonds many common construction materials
- Suitable for a wide variety of fixing tasks
- Distinctive pink formulation for visible application
- Convenient 350ml cartridge
Always read the cartridge label and current Everbuild technical guidance before use. Confirm substrate compatibility and retain appropriate mechanical fixings wherever required for structural integrity or safety.
